I have setup on TSM backup to this windows share \\server\hk_backup but nothing is displayed when I go to restore it, even though I know it has been back up (view the attachment)
↧
Missing Restore Share - HELP!!!
↧
Restore Windows 2008r2 machine
Greetings!
We would like to prepare a document called: Bussiness continuity plan, and the main gold for this document is to restore a Windows 2008 r2 server.
We have followed the instructions: https://www.ibm.com/developerworks/m...0Vista?lang=en
We came to the step:
3. Test network connectivity
Use the ping command to
test network connectivity. For example, if your Tivoli Storage Manager server's
IP address is 10.0.1.73, you can issue ping
10.0.1.73to verify that the server is
reachable:
X:\windows\system32>ping 10.0.1.73
The problem is that PING is not working and we have tried adding a static address:
netsh interface ip set address name="Local Area Connection" static 192.168.x.x 255.255.x.0 192.168.x.x
gaves a result: The filename, directory name, or volume label syntax is incorrect.
We are trying to boot WinPE ISO on a vmware esxi 5.X on a newly prepared Virtual machine.
I have feeling that this gots to do sth with a Vmware NIC drivers that it should be included on WINPE ISO file.
netsh interface ip show config command gives a result:
Configuration for interface "Loopback Pseudo-Interface 1"
DHCP enabled: no
IP Address: 127.0.0.1
Subnet Prefix: 127.0.0.0/8 (mask 255.0.0.0)
InterfaceMetric: 50
Statically Configured DNS Servers: none
Register with which suffix: none
Statically Configured WINS servers: none
Has anyone before had problems with WINPE and using them on vmware esxi machines? There must be a way of adding NIC drivers for vmware right? Any hints?
With best regards,
We would like to prepare a document called: Bussiness continuity plan, and the main gold for this document is to restore a Windows 2008 r2 server.
We have followed the instructions: https://www.ibm.com/developerworks/m...0Vista?lang=en
We came to the step:
3. Test network connectivity
Use the ping command to
test network connectivity. For example, if your Tivoli Storage Manager server's
IP address is 10.0.1.73, you can issue ping
10.0.1.73to verify that the server is
reachable:
X:\windows\system32>ping 10.0.1.73
The problem is that PING is not working and we have tried adding a static address:
netsh interface ip set address name="Local Area Connection" static 192.168.x.x 255.255.x.0 192.168.x.x
gaves a result: The filename, directory name, or volume label syntax is incorrect.
We are trying to boot WinPE ISO on a vmware esxi 5.X on a newly prepared Virtual machine.
I have feeling that this gots to do sth with a Vmware NIC drivers that it should be included on WINPE ISO file.
netsh interface ip show config command gives a result:
Configuration for interface "Loopback Pseudo-Interface 1"
DHCP enabled: no
IP Address: 127.0.0.1
Subnet Prefix: 127.0.0.0/8 (mask 255.0.0.0)
InterfaceMetric: 50
Statically Configured DNS Servers: none
Register with which suffix: none
Statically Configured WINS servers: none
Has anyone before had problems with WINPE and using them on vmware esxi machines? There must be a way of adding NIC drivers for vmware right? Any hints?
With best regards,
↧
↧
TSM Library With Mixed LTO4 and LTO5 Drive and LTO4 Media
Dear All,
I seek your views on following scenario.
I have 1 TS3500 Storage library with 12 drives of LTO4 then we expanded Library with LTO5 12drives.
Newly added 12 LTO5 drives are used for the backup of servers to one storage pool and backup size is more than 30 TB.
most of the clients uses LTO4 drives. All media used is LTO4.
While reviewing TSM server I have seen device class definition contains format=drive which is configured when I was not with organization. Now my client asking for go for LTO5 tapes. while reviewing TSM blogs I came to know the following.
1> format=drive is not recommended when you have mixed drive. Do I have to specify new devclass for LTO5 tapes?
2> you cannot keep mixed media in 1 storage pool not recommended.
3> I have tested that LTO5 tapes can be defined and mounted on LTO5 drive with the device class defined for the LTO4 storage pools it is because format=drive is mentioned in device class definition.
4> what Steps I have to do in order to use mixed drives and media in TSM properly.
5> Any issue I will get in case of any restoration?
Help will be appreciated.
Thanks
Abhijeet
I seek your views on following scenario.
I have 1 TS3500 Storage library with 12 drives of LTO4 then we expanded Library with LTO5 12drives.
Newly added 12 LTO5 drives are used for the backup of servers to one storage pool and backup size is more than 30 TB.
most of the clients uses LTO4 drives. All media used is LTO4.
While reviewing TSM server I have seen device class definition contains format=drive which is configured when I was not with organization. Now my client asking for go for LTO5 tapes. while reviewing TSM blogs I came to know the following.
1> format=drive is not recommended when you have mixed drive. Do I have to specify new devclass for LTO5 tapes?
2> you cannot keep mixed media in 1 storage pool not recommended.
3> I have tested that LTO5 tapes can be defined and mounted on LTO5 drive with the device class defined for the LTO4 storage pools it is because format=drive is mentioned in device class definition.
4> what Steps I have to do in order to use mixed drives and media in TSM properly.
5> Any issue I will get in case of any restoration?
Help will be appreciated.
Thanks
Abhijeet
↧
ADSM.ORG new view
I am not liking the new setup of ADSM.ORG too much. I see duplicated posts and was wondering why the change?
↧
No of files restored
Hi,
Can anyone let me know how to check howmany no of files restored and howmany to be restored , while the restore process is going on?
Thanks in Advance,
Rajesh.
Can anyone let me know how to check howmany no of files restored and howmany to be restored , while the restore process is going on?
Thanks in Advance,
Rajesh.
↧
↧
problem with fildev stg pool
Hi,
We have this setup :
TSM 6.3 server with 1 stg pool that is filedev. volume size is 100 GB, maxscratch is 37.
Space available is 3.8 TB and space is contained on two disks :
Disk D with 3.4 TB capoacity
Disk J with 400 GB capacity.
disk J has 4 volumes right now, and disk D has 26 volumes. There is enough space on D disk (around 1 TB)
Last night TSM tried to create output volume on disk J, and we recieved warnings http://dl.dropbox.com/u/37080112/tsm_space.png
Any idea why TSM server does not use disk D for new volumes instead of J?
We have this setup :
TSM 6.3 server with 1 stg pool that is filedev. volume size is 100 GB, maxscratch is 37.
Space available is 3.8 TB and space is contained on two disks :
Disk D with 3.4 TB capoacity
Disk J with 400 GB capacity.
disk J has 4 volumes right now, and disk D has 26 volumes. There is enough space on D disk (around 1 TB)
Last night TSM tried to create output volume on disk J, and we recieved warnings http://dl.dropbox.com/u/37080112/tsm_space.png
Any idea why TSM server does not use disk D for new volumes instead of J?
↧
TDP backup is continuously missing for 4 months ..pls advise...
I am totally clueless about this issue, please help me..
We have a Notes server configured for TDP backup. For last four months, TDP backup status is "Missed".
Everyday when i check backup schedule for this server, it shows two previous backup schedule "in Progress"
tsm: ADSM>q eve * usubnsv01_tdp* begindate=-10 enddate=today
Scheduled Start Actual Start Schedule Name Node Name Status
-------------------- -------------------- ------------- ------------- ---------
12/18/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
12/19/12 15:19:19 12/19/12 15:19:35 USUBNSV01_TDP USUBNSV01_TDP In Progr-
ess
12/20/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
12/21/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
12/22/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
12/23/12 15:19:19 12/23/12 15:28:04 USUBNSV01_TDP USUBNSV01_TDP In Progr-
ess
12/24/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
12/25/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
when i give "Q session" there is no session active for this node.
DOMASCH.LOG last update as follows
08/06/2012 19:15:31 Total Domino databases inspected: 1,179
08/06/2012 19:15:31 Total Domino databases backed up: 982
08/06/2012 19:15:31 Total Domino databases excluded: 2
08/06/2012 19:15:31 Total Domino backup objects expired: 0
08/06/2012 19:15:31 Throughput rate: 2,905.45 Kb/Sec
08/06/2012 19:15:31 Total bytes transferred: 41,650,830,746
08/06/2012 19:15:31 Elapsed processing time: 13,999.42 Secs
08/07/2012 15:26:16 ============== Log file pruned using log retention period of 60 day(s)
08/07/2012 15:26:16 ============== 19 out of 1162 entries pruned from the top of this log
08/07/2012 15:26:18 ================================================== =======================
08/07/2012 15:26:18 Request : INCREMENTAL
08/07/2012 15:26:18 Database Input List : *
08/07/2012 15:26:18 Number of Buffers : 3
08/07/2012 15:26:18 Buffer Size : 1024
08/07/2012 15:26:18 Wait for Tape Mounts? : Yes
08/07/2012 15:26:18 Process Subdirectories? : Yes
08/07/2012 15:26:18 TSM Options File : dsm.opt
08/07/2012 15:26:18 TSM Nodename Override :
08/07/2012 15:26:18 -------------------------------------------------------------------------
08/16/2012 09:16:01 *** Request being sent to cancel the current command.
:confused:
We have a Notes server configured for TDP backup. For last four months, TDP backup status is "Missed".
Everyday when i check backup schedule for this server, it shows two previous backup schedule "in Progress"
tsm: ADSM>q eve * usubnsv01_tdp* begindate=-10 enddate=today
Scheduled Start Actual Start Schedule Name Node Name Status
-------------------- -------------------- ------------- ------------- ---------
12/18/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
12/19/12 15:19:19 12/19/12 15:19:35 USUBNSV01_TDP USUBNSV01_TDP In Progr-
ess
12/20/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
12/21/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
12/22/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
12/23/12 15:19:19 12/23/12 15:28:04 USUBNSV01_TDP USUBNSV01_TDP In Progr-
ess
12/24/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
12/25/12 15:19:19 USUBNSV01_TDP USUBNSV01_TDP Missed
when i give "Q session" there is no session active for this node.
DOMASCH.LOG last update as follows
08/06/2012 19:15:31 Total Domino databases inspected: 1,179
08/06/2012 19:15:31 Total Domino databases backed up: 982
08/06/2012 19:15:31 Total Domino databases excluded: 2
08/06/2012 19:15:31 Total Domino backup objects expired: 0
08/06/2012 19:15:31 Throughput rate: 2,905.45 Kb/Sec
08/06/2012 19:15:31 Total bytes transferred: 41,650,830,746
08/06/2012 19:15:31 Elapsed processing time: 13,999.42 Secs
08/07/2012 15:26:16 ============== Log file pruned using log retention period of 60 day(s)
08/07/2012 15:26:16 ============== 19 out of 1162 entries pruned from the top of this log
08/07/2012 15:26:18 ================================================== =======================
08/07/2012 15:26:18 Request : INCREMENTAL
08/07/2012 15:26:18 Database Input List : *
08/07/2012 15:26:18 Number of Buffers : 3
08/07/2012 15:26:18 Buffer Size : 1024
08/07/2012 15:26:18 Wait for Tape Mounts? : Yes
08/07/2012 15:26:18 Process Subdirectories? : Yes
08/07/2012 15:26:18 TSM Options File : dsm.opt
08/07/2012 15:26:18 TSM Nodename Override :
08/07/2012 15:26:18 -------------------------------------------------------------------------
08/16/2012 09:16:01 *** Request being sent to cancel the current command.
:confused:
↧
dsmc restore system object?
Greetings!
Two dumb questions:
We are doing test restore of a WINxp machine with WIN PE iso file and tsm client integrated.
if we run dsmc restore system object command it does not work.
Backup/restore SystemState is probably not supported in XP? And it's supported since 2003 R2&Vista and l8r?
With best regards,
Two dumb questions:
We are doing test restore of a WINxp machine with WIN PE iso file and tsm client integrated.
if we run dsmc restore system object command it does not work.
Backup/restore SystemState is probably not supported in XP? And it's supported since 2003 R2&Vista and l8r?
With best regards,
↧
Include/Exclude question
All,
I am backing up a NAS share via a proxy node. The problem I'm having is that the primary share has 140 directories. They only want to back up 20 of these directories. The only way I see is to do domain z: and then exclude 120 directories. Is there a way for me just to identify the directories within the filesystem I want to backup? There doesn't appear to be a include.dir command.
Please help and Happy Holidays!
Don
I am backing up a NAS share via a proxy node. The problem I'm having is that the primary share has 140 directories. They only want to back up 20 of these directories. The only way I see is to do domain z: and then exclude 120 directories. Is there a way for me just to identify the directories within the filesystem I want to backup? There doesn't appear to be a include.dir command.
Please help and Happy Holidays!
Don
↧
↧
Limiting message being written to the activity log
Is there any way to limit certain messages from being written to the TSM server activity log? For example, I have a PERL script that issues the SHOW INVOBJECT command which results on a message being written. If I issue lots of SHOW INVOBJECT commands it could fill the log. I would love to be able to stop that command from writing to the activity log.
↧
Client schedule log time/date stamps.
The TSM client does not include the time and date for each entry in its dsmsched.log when the backup job is invoked by something other than the TSM scheduler. Is there any way to have the time/date added/included under these circumstances?
↧
TDP for SQL database backup failed with TCP/IP Connection failure
Hi Experts,
We have configured TDP for SQL to take database backup, but some of our SQL server databases backup are failing with the following error.
12/27/2012 05:13:21 ACO5436E A failure occurred on stripe number (1), rc = 418
12/27/2012 05:13:21 ANS1017E (RC-50) Session rejected: TCP/IP connection failure
12/27/2012 05:13:22 Backup of XX failed.
12/27/2012 05:13:22 ANS1017E (RC-50) Session rejected: TCP/IP connection failure
The backup is completing when we rerun the backup, but as per the schedule backup is getting failed every week. But even when we rerun the backup most of the time we are getting the above error. So we have to keep on trigger the backup at one fine time it will complete. This is the case for some of the SQL server and some of the instances. In the windows event log we have the below error log
BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'TDPSQL-000021E4-0001'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
We have raised the support case with IBM, they said that it is the network problem, but when we checked with our network team, we got reply saying that no problem in network.
Kindly let us know what could be the issue. Where do we need to concentrate to solve this issue. We have to solve this issue as soon as possible.
Regards,
Kiruba
We have configured TDP for SQL to take database backup, but some of our SQL server databases backup are failing with the following error.
12/27/2012 05:13:21 ACO5436E A failure occurred on stripe number (1), rc = 418
12/27/2012 05:13:21 ANS1017E (RC-50) Session rejected: TCP/IP connection failure
12/27/2012 05:13:22 Backup of XX failed.
12/27/2012 05:13:22 ANS1017E (RC-50) Session rejected: TCP/IP connection failure
The backup is completing when we rerun the backup, but as per the schedule backup is getting failed every week. But even when we rerun the backup most of the time we are getting the above error. So we have to keep on trigger the backup at one fine time it will complete. This is the case for some of the SQL server and some of the instances. In the windows event log we have the below error log
BackupVirtualDeviceFile::RequestDurableMedia: Flush failure on backup device 'TDPSQL-000021E4-0001'. Operating system error 995(The I/O operation has been aborted because of either a thread exit or an application request.).
We have raised the support case with IBM, they said that it is the network problem, but when we checked with our network team, we got reply saying that no problem in network.
Kindly let us know what could be the issue. Where do we need to concentrate to solve this issue. We have to solve this issue as soon as possible.
Regards,
Kiruba
↧
TSM Database restore from vaulted tape
Hello - We had a TSM database corruption and now TSM will not start. I need to restore our TSM database from a tape that was sent to our offsite...
↧
↧
ANS1459E VSS Automated System Recovery (ASR) failed.
Greetings!
We are restoring 2003 r2 machine with WIN PE following these instructions:
https://www.ibm.com/developerworks/m...0Vista?lang=en
We have a problem in 9. step:
9. Start the system state restore
Use the command dsmc restore
systemstate to restore the system state:
dsmc restore systemstate
We receive an error:
ANS1459E VSS Automated System Recovery (ASR) failed.
FULL ERROR LOG CONTAINS THIS:
IBM Tivoli Storage Manager
Command Line Backup-Archive Client Interface
Client Version 6, Release 2, Level 4.0
Client date/time: 12/31/2012 08:16:59
(c) Copyright by IBM Corporation and other(s) 1990, 2011. All Rights Reserved.
Node Name: servername
Session established with server TSM: AIX-RS/6000
Server Version 5, Release 5, Level 6.0
Server date/time: 12/31/2012 09:17:03 Last access: 12/31/2012 09:09:45
Restore System State using shadow copy...
Restoring 1,612 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\COM+ REGDB Writer.xml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\COM+ REGDB Writer.xml [Done]
Restoring 4,074 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\Event Log Writer.xml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\Event Log Writer.xml [Done]
Restoring 4,638 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\Registry Writer.xml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\Registry Writer.xml [Done]
Restoring 462,902 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\System Writer.xml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\System Writer.xml [Done]
Restoring 208,370 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\SystemState_ Audit.txt --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\SystemState_Audit.txt [Done]
Restoring 2,386 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\TSM_Backup.x ml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\TSM_Backup.xml [Done]
Restoring 1,416 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\WMI Writer.xml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\WMI Writer.xml [Done]
Total number of objects restored: 7
Total number of objects failed: 0
Total number of bytes transferred: 670.76 KB
Data transfer time: 0.00 sec
Network data transfer rate: 0.00 KB/sec
Aggregate data transfer rate: 296.14 KB/sec
Elapsed processing time: 00:00:02
ANS1459E VSS Automated System Recovery (ASR) failed.
I see that total number of objects failed is 0, but there is an error ASR failed, should we be conncerned?
The server which are we restoring had in dsm.opt
NODENAME servername
TCPSERVERADDRESS ip-of-tsm-server
SNAPSHOTPROVIDERFS VSS
AND EXCLUDE/INCLUDE LIST
With best regards,
We are restoring 2003 r2 machine with WIN PE following these instructions:
https://www.ibm.com/developerworks/m...0Vista?lang=en
We have a problem in 9. step:
9. Start the system state restore
Use the command dsmc restore
systemstate to restore the system state:
dsmc restore systemstate
We receive an error:
ANS1459E VSS Automated System Recovery (ASR) failed.
FULL ERROR LOG CONTAINS THIS:
IBM Tivoli Storage Manager
Command Line Backup-Archive Client Interface
Client Version 6, Release 2, Level 4.0
Client date/time: 12/31/2012 08:16:59
(c) Copyright by IBM Corporation and other(s) 1990, 2011. All Rights Reserved.
Node Name: servername
Session established with server TSM: AIX-RS/6000
Server Version 5, Release 5, Level 6.0
Server date/time: 12/31/2012 09:17:03 Last access: 12/31/2012 09:09:45
Restore System State using shadow copy...
Restoring 1,612 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\COM+ REGDB Writer.xml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\COM+ REGDB Writer.xml [Done]
Restoring 4,074 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\Event Log Writer.xml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\Event Log Writer.xml [Done]
Restoring 4,638 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\Registry Writer.xml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\Registry Writer.xml [Done]
Restoring 462,902 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\System Writer.xml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\System Writer.xml [Done]
Restoring 208,370 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\SystemState_ Audit.txt --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\SystemState_Audit.txt [Done]
Restoring 2,386 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\TSM_Backup.x ml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\TSM_Backup.xml [Done]
Restoring 1,416 servername\SystemState\NULL\System State\SystemState\adsm.sys\vss_staging\servername\ TSMserver.domain.LOCAL\20121228154058\WMI Writer.xml --> \\minint-aaeu4kk\x$\Windows\Temp\~adsm.sys\adsm.sys\vss_sta ging\servername\TSMserver.domain.LOCAL\20121228154 058\WMI Writer.xml [Done]
Total number of objects restored: 7
Total number of objects failed: 0
Total number of bytes transferred: 670.76 KB
Data transfer time: 0.00 sec
Network data transfer rate: 0.00 KB/sec
Aggregate data transfer rate: 296.14 KB/sec
Elapsed processing time: 00:00:02
ANS1459E VSS Automated System Recovery (ASR) failed.
I see that total number of objects failed is 0, but there is an error ASR failed, should we be conncerned?
The server which are we restoring had in dsm.opt
NODENAME servername
TCPSERVERADDRESS ip-of-tsm-server
SNAPSHOTPROVIDERFS VSS
AND EXCLUDE/INCLUDE LIST
With best regards,
↧
Restore with a different nodename
If we follow: https://www.ibm.com/developerworks/m...0Vista?lang=en for bare metal restore, and if the machine we are restoring is still alive how can we achieve that durring the restore procedure we restore a machine to a machine with a different nodename?
↧
Erro "ANR8935E A compatible device class for shared library" while backup using STA
Hi,
my tape library is : IBM3584
This library have 6LTO-4 drives and 4 - LTO-5 drives...
TSM Server : Server Version 5, Release 5, Level 5.2OS of TSM server : AIX 5.3 (5.3.0.0)
OS of backup client - AIX6.1 (6100-06-05-1115)
I get the following error while giving backup using STA to my LTO-5 tapes (using LTO 5 drives).
ANR8935E A compatible device class for shared library 3584LIB1 on server DCBKP_STA was not found.
ANR0535W Transaction failed for session 25332 for node DCRPT1 (AIX) - insufficient mount points available to
With out using STA ("lanfree no" in dsm.sys), backup is happening succesfully...
And, backup using LTO4 drives in this same library is happening through STA succesfully...
tsm: TSMALU>q server DCBKP_STA f=d
Server Name: DCBKP_STA
Comm. Method: TCPIP
High-level Address: 10.250.5.140
Low-level Address: 1505
Description:
Allow Replacement: No
Node Name:
Last Access Date/Time: 12/31/12 18:52:01
Days Since Last Access: <1
Locked?: No
Compression: No
Archive Delete Allowed?: (?)
URL:
Registration Date/Time: 12/10/12 22:06:44
Registering Administrator: ADMIN
Bytes Received Last Session: 293
Bytes Sent Last Session: 332
Duration of Last Session: 80.22
Pct. Idle Wait Last Session: 100.00
Pct. Comm. Wait Last Session: 0.00
Pct. Media Wait Last Session: 0.00
Grace Deletion Period: 5
Managing profile:
Server Password Set: Yes
Server Password Set Date/Time: 12/10/12 22:06:44
Days Since Server Password Set: 21
Invalid Sign-on Count for Server: 0
Virtual Volume Password Set: No
Virtual Volume Password Set Date/Time: (?)
Days Since Virtual Volume Password Set: (?)
Invalid Sign-on Count for Virtual Volume Node: 0
Validate Protocol: No
Version: 5
Release: 5
Level: 0.0
Role(s): Storage Agent Event Logging Library Sharing
more... (<ENTER> to continue, 'C' to cancel)
tsm: TSMALU>
tsm: TSMALU>q library 3584LIB1 f=d
Library Name: 3584LIB1
Library Type: SCSI
ACS Id:
Private Category:
Scratch Category:
WORM Scratch Category:
External Manager:
Shared: Yes
LanFree:
ObeyMountRetention:
Primary Library Manager:
WWN: 500507630F259201
Serial Number: 0000078241050402
AutoLabel: No
Reset Drives: Yes
Relabel Scratch:
Last Update by (administrator): ADMIN
Last Update Date/Time: 11/11/09 19:17:47
tsm: TSMALU>
tsm: TSMALU>q path DCBKP_STA
Source Name Source Type Destination Destination On-Line
Name Type
----------- ----------- ----------- ----------- -------
DCBKP_STA SERVER DRIVE01 DRIVE Yes
DCBKP_STA SERVER DRIVE02 DRIVE Yes
DCBKP_STA SERVER DRIVE03 DRIVE Yes
DCBKP_STA SERVER DRIVE04 DRIVE Yes
DCBKP_STA SERVER DRIVE05 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE01 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE02 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE03 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE04 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE05 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE06 DRIVE Yes
DCBKP_STA SERVER GEN5DRIVE01 DRIVE Yes
DCBKP_STA SERVER GEN5DRIVE02 DRIVE Yes
DCBKP_STA SERVER GEN5DRIVE03 DRIVE Yes
DCBKP_STA SERVER GEN5DRIVE04 DRIVE Yes
tsm: TSMALU>
Please guide me....i am confused since backup using STA for LTO-4 drives is happening succesfully.....
Regards,
Jibu
my tape library is : IBM3584
This library have 6LTO-4 drives and 4 - LTO-5 drives...
TSM Server : Server Version 5, Release 5, Level 5.2OS of TSM server : AIX 5.3 (5.3.0.0)
OS of backup client - AIX6.1 (6100-06-05-1115)
I get the following error while giving backup using STA to my LTO-5 tapes (using LTO 5 drives).
ANR8935E A compatible device class for shared library 3584LIB1 on server DCBKP_STA was not found.
ANR0535W Transaction failed for session 25332 for node DCRPT1 (AIX) - insufficient mount points available to
With out using STA ("lanfree no" in dsm.sys), backup is happening succesfully...
And, backup using LTO4 drives in this same library is happening through STA succesfully...
tsm: TSMALU>q server DCBKP_STA f=d
Server Name: DCBKP_STA
Comm. Method: TCPIP
High-level Address: 10.250.5.140
Low-level Address: 1505
Description:
Allow Replacement: No
Node Name:
Last Access Date/Time: 12/31/12 18:52:01
Days Since Last Access: <1
Locked?: No
Compression: No
Archive Delete Allowed?: (?)
URL:
Registration Date/Time: 12/10/12 22:06:44
Registering Administrator: ADMIN
Bytes Received Last Session: 293
Bytes Sent Last Session: 332
Duration of Last Session: 80.22
Pct. Idle Wait Last Session: 100.00
Pct. Comm. Wait Last Session: 0.00
Pct. Media Wait Last Session: 0.00
Grace Deletion Period: 5
Managing profile:
Server Password Set: Yes
Server Password Set Date/Time: 12/10/12 22:06:44
Days Since Server Password Set: 21
Invalid Sign-on Count for Server: 0
Virtual Volume Password Set: No
Virtual Volume Password Set Date/Time: (?)
Days Since Virtual Volume Password Set: (?)
Invalid Sign-on Count for Virtual Volume Node: 0
Validate Protocol: No
Version: 5
Release: 5
Level: 0.0
Role(s): Storage Agent Event Logging Library Sharing
more... (<ENTER> to continue, 'C' to cancel)
tsm: TSMALU>
tsm: TSMALU>q library 3584LIB1 f=d
Library Name: 3584LIB1
Library Type: SCSI
ACS Id:
Private Category:
Scratch Category:
WORM Scratch Category:
External Manager:
Shared: Yes
LanFree:
ObeyMountRetention:
Primary Library Manager:
WWN: 500507630F259201
Serial Number: 0000078241050402
AutoLabel: No
Reset Drives: Yes
Relabel Scratch:
Last Update by (administrator): ADMIN
Last Update Date/Time: 11/11/09 19:17:47
tsm: TSMALU>
tsm: TSMALU>q path DCBKP_STA
Source Name Source Type Destination Destination On-Line
Name Type
----------- ----------- ----------- ----------- -------
DCBKP_STA SERVER DRIVE01 DRIVE Yes
DCBKP_STA SERVER DRIVE02 DRIVE Yes
DCBKP_STA SERVER DRIVE03 DRIVE Yes
DCBKP_STA SERVER DRIVE04 DRIVE Yes
DCBKP_STA SERVER DRIVE05 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE01 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE02 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE03 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE04 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE05 DRIVE Yes
DCBKP_STA SERVER GEN4DRIVE06 DRIVE Yes
DCBKP_STA SERVER GEN5DRIVE01 DRIVE Yes
DCBKP_STA SERVER GEN5DRIVE02 DRIVE Yes
DCBKP_STA SERVER GEN5DRIVE03 DRIVE Yes
DCBKP_STA SERVER GEN5DRIVE04 DRIVE Yes
tsm: TSMALU>
Please guide me....i am confused since backup using STA for LTO-4 drives is happening succesfully.....
Regards,
Jibu
↧
TSM with NETAPP filer - Backup & Restore is too slow
Hi,
Hope some one can help us.
We have configured NAS (NETAPP filer) to backup on TSM 6.3 using NDMP. The schedule runs from TSM admin schedule everyday. The backups goes to IBM VTL device & the backup size is around 2 TB.
The problem is, the backup process runs for minimum 16-18 hours everyday & restore process takes hours to load the view. Sometimes we have to kill the NAS backup process to reduce the TSM load.
CMD ->
ba n <filername > <volumename> mg=<mgclassname> toc=preferred wait=no mode=diff type=backupi
Is there any best method that we can use to improve the performance? Pls. suggest. Really appreciate your help.
Regards,
Hope some one can help us.
We have configured NAS (NETAPP filer) to backup on TSM 6.3 using NDMP. The schedule runs from TSM admin schedule everyday. The backups goes to IBM VTL device & the backup size is around 2 TB.
The problem is, the backup process runs for minimum 16-18 hours everyday & restore process takes hours to load the view. Sometimes we have to kill the NAS backup process to reduce the TSM load.
CMD ->
ba n <filername > <volumename> mg=<mgclassname> toc=preferred wait=no mode=diff type=backupi
Is there any best method that we can use to improve the performance? Pls. suggest. Really appreciate your help.
Regards,
↧
↧
Error on tape
Hi,
We are using LTO5 tape for our TSM backup,
From few days we are having read write error on a tape, when we tried to move data.
last 2% of data was unable to move. we had tried many time but still data is not moving.
we had done audit libvolume twice but still data is available and error as well :confused: , there is 1 read error and 4 write error on volume. Can you please suggest me how to remove these errors from the tape.
or else these tape should be left as damaged tape vol.
Thanks :up:
We are using LTO5 tape for our TSM backup,
From few days we are having read write error on a tape, when we tried to move data.
last 2% of data was unable to move. we had tried many time but still data is not moving.
we had done audit libvolume twice but still data is available and error as well :confused: , there is 1 read error and 4 write error on volume. Can you please suggest me how to remove these errors from the tape.
or else these tape should be left as damaged tape vol.
Thanks :up:
↧
Problem installing TSM Admin Center6.3.3.000-TIV-TSMAC on Win 2008 Server
Hello, Not that I need it desperately, the TSM server runs fine, but from time to time I am trying to install this god forsaken piece of software called TSM Administration Center. It always fails with following info. A very informative info indeed. So if anyone is able to help me I'd be grateful. The log is attached as Zip, because IBM felt that it would be great if the log will be about 0.5 MB big...
↧
View Management Classes
Hi!
Going throw an old backup server and doing some documentation.
Is there an easy way to check which backups are connected to a management class? So that I don’t have to open every dsm.opt and look for ex:
EXCLUDE.DIR "f:\Drift\*"
INCLUDE.FILE "f:\Backup\...\*.bak" Databas
INCLUDE.FILE "f:\Backup\...\*.trn" Trans
Going throw an old backup server and doing some documentation.
Is there an easy way to check which backups are connected to a management class? So that I don’t have to open every dsm.opt and look for ex:
EXCLUDE.DIR "f:\Drift\*"
INCLUDE.FILE "f:\Backup\...\*.bak" Databas
INCLUDE.FILE "f:\Backup\...\*.trn" Trans
↧